Revolvers Grips for Smith &
Wesson
Typical Round Butt Frame
|
Typical Square Butt Frame |
|
 |
J
Frame Round Butt (.38
Special and 9mm)
Models
242, 296,
31, 34, 36, 38, 317, 331, 332, 337, 342, 40, 42, 042, 43, 49, 442, 60, 65,
631, 632, 640, 642, 651, 940 (verify as shown below) |
|
|
J
Frame Square Butt (.38
Special)
34 ( Kit gun .22/.32 post 1960), 35 (
post 1960), 36, 37, 38, 49, 51, 640, 649, 650, 651
(verify as shown below) |
|
|
K & L
Frame Round Butt
(.38
Special and .357 Magnum)
10 (post 1994), 13, 19, 30, 500, 64,
65, 66 (post 1995), 686 (verify
as shown below) |
|
|
K & L
Frame Round Conversion
(.38
Special and .357 Magnum)
(same
as Round Butt, verify as shown below) |
|
|
K & L
Frame Square Butt
(.38
Special and .357 Magnum)
K-32, 10 (pre 1994), 11, 13, 14, 15,
16, 17, 17 Plus, 18, 19, 31, 32, 33, 34(pre 1960), 35 (pre 1960), 48,
66, 67, 547, 581, 586, 617 Plus, 648, 681, 686 (verify
as shown below) |
|
|
N
Frame Round Butt (.41
and .44 Magnum)
29, 610, 625, 627, 629 & Magna Classic (verify
as shown below) |
|
|
N
Frame Round Conversion
(.41
and .44 Magnum)
(same
as Round Butt, verify as shown below) |
|
|
N
Frame Square Butt (.41
and .44 Magnum)
20, 21, 23, 24, 25, 26, 27, 28, 29, 520, 610, 625, 629,
657 & .44 Classic Hunter
(verify
as shown below) |
Smith
and Wesson Revolvers are classified by size and designated with a letter. There are three basic
sizes:
J Frame: .38 Special and 9mm. This is the smallest frame. Early models may have a
square butt or a round butt but all later models have round butts.
K/L Frame: .38 Special and .357 Magnum. This is the medium frame revolver which may
have a square butt or a round butt, but all later models (since mid 1990's)
have round butts.
N Frame: .41 and .44 Magnum. This is the large
frame revolver which may have a square butt or a round butt, but all later
models (since mid 1990's) have round butts.
To find out whether you need Square butt or
Round butt grips remove the existing grips and compare the grip frame to the
pictures below. (If you have Hogue® rubber grips, the clip attached to the bottom of the frame needs to be removed
for our replacement grips.)
If you need further information on your revolver click the link to Smith
and Wesson Customer Service
|
